SA-F12 - Banner SA-F12, Accessory: Mounting Base 70 mm diameter; Material: Black Painted Zinc; 1/2 in. NPSM/DN15 pipe; Mounting hardware included

SA-FFB12 - Banner SA-FFB12, Bracket: Flush Foldable Bracket to 1/2 NPSM Black

SA-FFB12C - Banner SA-FFB12C, Bracket: Flush Foldable Bracket to 1/2 NPSM Gray

SA-M30 - Banner SA-M30, Acessory: Cover Adapter M30 Black

SA-M30C - Banner SA-M30C, Accessory: Cover Adapter M30 Gray

SMBFLXCLAMPD - Banner SMBFLXCLAMPD, Flexible arm mounting clamp; 2X 1/4-20 W/1.375 spacing; Black Painted Steel

SMBFLXMAG - Banner SMBFLXMAG, SMBFLXMAG Magnet Mount Kit; For Use With Flexible Mounting arms; 3.2 Inch Diameter; Up To 95 LB Pull

SMBFLXMAGD - Banner SMBFLXMAGD, SMBFLXMAGD Magnet Mount Kit; For Use With Flexible Mounting arms; 3.2 Inch Diameter; 2 X 1/4-20 W/1.375 spacing; Up To 100 LB Pull

SMBFLXMAGR - Banner SMBFLXMAGR, Protective magnet cover prevents scratches to painted surface; Use with SMBMAG3

SMBLLG - Banner SMBLLG, Bracket: LLG Mounting Bracket with Head Sink

SMBLLGS - Banner SMBLLGS, Bracket: LLG Swivel Mounting

SMBMAG3 - Banner SMBMAG3, Accessory: Magnet Mount Kit; For Use With WLC90 Series Lights; 3.2 Inch Diameter; up To 95 LB Pull; Use with LMBWLC90PT or SMBAMS70AS bracket (hardware included)

SMBOPSTN3 - Banner SMBOPSTN3, Kit; SMBAMS22RA3 (88605); K30APTXRF2Q (85200); K30APTXWF2Q (88399); K30APTXYF2Q (88398); SA-K30TA22E (88526)

SMBPVL2-500 - Banner SMBPVL2-500, Bracket: Sensor Mounting - PVL500 Array; Flat; Mounting Reflector Inside Bin; Material: Clear Zinc Plated Steel

SMBPVL3-500 - Banner SMBPVL3-500, Bracket: Sensor Mounting - PVL500 Array; Right Angle; Mounting Reflector Outside Bin; Material: Clear Zinc Plated Steel

SMBWLS28RAS - Banner SMBWLS28RAS, Bracket: Two Replacement Brackets hardware included; 316 Stainless Steel; Used with WLS28 models

SMBWLS28SP - Banner SMBWLS28SP, Bracket: For use with WLS28; Set of two snap brackets; 300 Series Stainless Steel

SOP-E12-1500A - Banner SOP-E12-1500A, SOP-E12-1500A 1500 mm (60 in.) elevated-use stand-off pipe (1/2 in. NPSM/DN15); Material: Anodized Aluminum(BLACK); 1/2 NPT thread at both ends; Compatible with most industrial environments

SOP-E12-900AC - Banner SOP-E12-900AC, 900 mm elevated-use stand-off pipe (1/2 in. NPSM/DN15); Material: Anodized Aluminum(CLEAR); 1/2 NPT thread at both ends; Compatible with most industrial environments