Dalton Gear Company - Drive Tensioners

Walker Industrial: Home > Manufacturers > A - D > Dalton Gear Company > Drive Tensioners Idler Sprockets > Drive Tensioners

Dalton Drive Tensioners

Adjustable Flange Mounted Tensioner- Heavy Duty

This special Dalton shaft has hardened and ground surfaces to permit the use of needle bearing idler sprockets.

More Info ›
Angular Base

The Angular base is designed for use with the secondary adjusting arm or spring adapter unit when additional tensioning capabilities are required.

More Info ›
Base Pad With Tension Slot

The Dalton versatile base pad can be used with a secondary arm or spring adapter to form tensioners with more varied tensioning capacity.

More Info ›
Secondary Adjusting Arm With Angular Base

The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1/2 inches.

More Info ›
Secondary Adjusting Arm With Base

The Dalton positioners are made of 60-45-10 ductile iron which insures strength and wear resistance

More Info ›
Shaft Mounted Tensioner

Dalton Shaft Mounted Tensioner makes sure no slippage on mounting shaft occurs because the locking screws insure a firm and uniform lock on the mounting shaft.

More Info ›
Spring Tensioner On Angular Base

This unit provides tensioning and positioning in cases where the mounting surface angle will not permit the use of a base mount tensioner.

More Info ›
Spring Tensioner On Base Pad

This unit has the advantages of the Base Pad Tensioner with an attachment for a spring actuated tensioner.

More Info ›