Home > Manufacturers > K - O > Migatron > Set Point Controllers & Accessories >

SPC-701 - Migatron SPC-701 Set Point Controller, Snap Track Mount, Analog Input, 1 Form C Relay Output, 1 0-10V Analog Output
SPC-701
 - Migatron
SPC-701
 
Price: $210.00
Manufacturer SKU: SPC-701
Manufacturer ID: F50-9270100



Availability: Normally Stocked
Part Number: SPC-701
Qty:

Description
 
SPC-701 - Migatron SPC-701 Set Point Controller, Snap Track Mount, Analog Input, 1 Form C Relay Output, 1 0-10V Analog Output

Specifications
  • Analog input
  • Snap track mount
  • Analog output
  • DC power in
  • One adjustable output
  • Form C relay output
  • Feed through sensor excitation power
  • WAGO press terminal blocks

The SPC-701 is an adjustable control with 1 setpoint. The setpoint is independently adjusted, and has a Form C relay output. This control can be used with any sensor or device that produces a 0-20 mA, 4-20 mA, 0-10V or 2-10V analog output. The SPC-701 will work with all Migatron analog output sensors. Besides the 1 relay output, there is a 0-10V analog output. This output can be used to drive a meter or other analog drive controls. This analog output can feed a SPC-701 or SPC-704 to provide additional setpoints. The SPC-701 also provides 24 VDC excitation power at to drive input sensors. The SPC-701 has a signal averaging potentiometer that helps alleviate false trips during sudden signal changes.

The SPC-701 can be mounted on Snap Track, DIN rail (with optional DIN mounting plate. Part #7942742 ) or four studs. The terminal blocks are press to open for easy wiring. There is an easy to view bright LED that show the relay status. The SPC-701 is powered by 24VDC. There is an isolated feed thru path across the board that can be used as a wiring aid. The relay output can handle up to 3 amps. Power On Status LED.


SPC701