Walker Industrial: Home > Manufacturers > P - S > Setra > Pressure Transducers > Room Pressure Monitoring > Setra Flex

Setra Flex
Sort By:
1
FLEX0R1WBRM7S2 - Setra Systems FLEX0R1WBRM7S2

Setra Systems - FLEX0R1WBRM7S2 - Room Monitor with  +/-0.10" W.C. sensor, +/- 0.25% FS, 7" Display, 2 pressure snubbers

Price: $3,221.02
FLEXR25WBRM7S2 - Setra Systems FLEXR25WBRM7S2

Setra Systems - FLEXR25WBRM7S2 - Room Monitor with  +/-0.25" W.C. sensor, +/- 0.25% FS, 7" Display, 2 pressure snubbers

Price: $3,221.02
FLEX0R1WBRC7S2 - Setra Systems FLEX0R1WBRC7S2

Setra Systems - FLEX0R1WBRC7S2 - Room Controller with  +/-0.10" W.C. sensor, +/- 0.25% FS, 7" Display, 2 pressure snubbers

Price: $4,333.17
   
 
1
Setra FLEX™ provides a flexible room environmental control and monitoring solution in a simple-to-use package. An attractive flush mount face plate is complemented by an intuitive graphical display to meet any architectural requirement. The unit supports 3 rooms, monitoring up to 6 parameters for each room. If addition I/O is required, an expansion I/O module enables the monitoring and control for more complicated applications. An optional differential pressure sensor can be either factory-installed in the unit or ordered separately and installed above the ceiling. Integration with building automation systems is made easy through either BACnet/IP or BACnet MS/TP network protocols.

Modular Design - A modular hardware design enables FLEX to fit in various wall thickness found around the globe. For applications which require the monitor to fit in wall depths less than 50mm, FLEX can be ordered with an external pressure sensor. When mounting in a three gang electrical box, FLEX can be ordered with an integrated on-board sensor. Sufficient on-board I/O provides connectivity for most common equipment and sensor applications. If additional connections are required, or if more advanced HVAC applications demand it, the expansion I/O module can be ordered as an accessory. A high accuracy of 0.25% differential pressure transducer is used in all pressure sensing options. A projected capacitive touch screen provides swipe functionality and allowed for use with medical gloves. Theface plate is attached to the unit body, enabling both tamper resistant operation and easy opening for pressure calibration.

pdfDownload the Model-Setra-Flex Brochure in *.pdf format

pdfDownload the Model-Setra-Flex Datasheet in *.pdf format