|
|
 |
|
Premium Efficiency
Super-E Motors are designed to conserve energy
over extended time periods. These premium
efficiency designs are available in both
Totally Enclosed Fan Cooled and Open Drip
Proof construction. All three phase motors are
Inverter Ready per NEMA Standard MG1, Part
31.4.4.2. This means the motors in 230 and 460
volts meet NEMA's corona inception voltage
requirements, under this Standard, and can
withstand peak voltages of up to 1600 volts.
Motors having premium efficiency are also
available in single phase designs.
|
 |
|
Automotive
Automotive approved motors are available in
both Standard High Efficiency, our Standard-E,
and Premium Efficiency, our Super-E, designs.
The Standard High Efficiency motors meet
efficiency times power factor requirements of
GM7EQ. The Premium Efficiency motors meet the
efficiency times power factor of GM7EHQ.
Available from stock in ratings from 1 HP to
100 HP. These cast iron motors meet automotive
requirements for sound power levels.
|
 |
|
Brake Motors
Baldor's line of brake motors are available in
totally enclosed fan cooled, open drip proof,
or explosion proof designs, in either single
or three phase. Stock ratings are available
from .25 horsepower through 30 horsepower.
These motors use a mechanical spring set brake
with a manual release. Brake motors may be
used on machine tools, conveyors, door
operators, speed reducers, hoists, or any
application requiring quick stops and positive
holds. |
 |
|
Commercial Motors
Baldor's new Definite Purpose Commercial Motor
line offers many new ratings designed for
applications with low to medium starting
torque requirements. The Baldor Commercial
Duty Motor line brings Baldor's reputation for
high quality designs to commercial
applications with a cost-effective offering.
This definite purpose product line is designed
for certain applications requiring NEMA 48 and
56 motors rated between 1/4 and 1 HP, in both
single and three phase ratings. Typical
applications include: Jet Pump, Heating and
Cooling, Ventilation, Air Conditioning,
Blowers, Direct Drive Fans, Condenser Fans,
and Pedestal Fans. |
 |
|
Explosion Proof
Baldor's Explosion-proof motors are ideal for
a wide variety of applications where hazardous
fumes or dust may be present. The motors are
available in three phase and single phase with
ratings, in stock, from 1/4 HP through 300 HP.
Designs available include standard foot
mounted, C face with base and C face less
base, 60 Hz and 50 Hz, Jet Pump motors, and
Inverter Drive motors. |
 |
|
F-2 Mounting
Motors built for applications requiring F-2
mounting are available from stock in 1/2 HP
through 60 HP. These motors are manufactured
in both TEFC and Open Drip Proof construction
in NEMA frames from 56 to and including 364T.
Many of the ratings are Class "F" insulated
with 1.15 Service Factor that operate within
Class "B" temperature limits. The motors are
stocked in both Standard High Efficiency and
Premium Efficiency designs. |
 |
|
Farm Duty
These motors are designed for many of the
varied applications found on the farm. Designs
include motors suitable for aeration fans,
auger drives, grain stirring, metering pumps,
instant reversing, irrigation tower drives,
and crop driers. General purpose motors are
also available in both single and three phase,
TEFC and ODP construction. For those loads
that are hard to start and require extra
torque, Baldor is the only motor manufacturer
that stocks Repulsion-Start Induction Run
motors, in sizes from 2 HP to 10 HP.
|
 |
|
General Purpose
Baldor's extensive line of General Purpose
motors are available in Open Drip-proof and
TEFC construction in both single and three
phase. Horsepower sizes available from stock
range from 1/12 HP through 1500 HP. Designed
for "general purpose" use means that these
motors can be used in applications which
include compressors, pumps, fans, conveyors,
material handling, machine tools and many
others. Also available are stock motors that
are direct replacements for the motors built
in Pre-1952 NEMA frames. |
 |
|
Severe Duty
Severe Duty motors are available from 1 HP to
500 HP. These products are especially designed
for those applications requiring protection of
the motors from severe environmental operating
conditions. A few typical applications which
might require these types of motors include
petro-chemical plants, mines, foundries, pulp
and paper plants, waste management facilities,
rock crushers, and chemical plants.
|
 |
|
HVAC
Baldor's line of Heating, Ventilation, and Air
Conditioning Motors are designed with
dynamically balanced rotors for reduced
vibration and quiet operation. The motors
range in size from 1/4 HP to 75 HP and include
heavy duty industrial designs as well as
designs for commercial applications. These
applications include ventilators, direct drive
and belted fans, exhaust fans, unit heaters,
air conditioning units, and commercial
refrigeration condensers. Also included are
motors designed especially for use with
variable torque electronic controls that are
used to conserve electricity. |
 |
|
Inverter Duty
Inverter Drive Motors are wound with 200
degree C. moisture resistant ISR (Inverter
Spike Resistant) magnet wire which
dramatically extends the life of the motors
compared to motors wound with non-ISR wire.
The motors available from stock range in size
from 1/3 HP to 500 HP. These motors are
designed for applications where up to a 1000:1
constant torque speed range is required.
Applications include conveyors, pumps, fans,
metal processing, compressors, test stands,
and material handling equipment. |
 |
|
Metric
Baldor's line of Metric Dimension Motors are
designed in IEC Frames from D63 through D200L.
The motors are available from stock in 50 Hz
or 60 Hz. This means that replacement 60 Hz
motors are readily available from Baldor to
replace metric motors that have failed on
imported machinery. Motor construction meets
IP54 and includes motors with B3 base
mounting, B5 Flange mounting, or B14 Face
mounting. Stock motors range in size from .18
kW to 30 kW. Typical applications for this
product include pumps, fans, conveyors,
machine tools, gear reducers and any other
jobs that requires IEC Frames. |
 |
|
Pressure Washer
These single phase motors are available in
both totally enclosed fan cooled and open drip
proof construction. Industrial quality with
200 degree C., moisture resistant wire, the
motors have UL and CSA recognized component
approvals. NEMA frame sizes include 56 through
184 in rigid base only or NEMA C face with
base. |
 |
|
Pump
Our pump line of motors includes single or
three phase jet pump motors, square flange
motors, close-coupled pump motors, and P-Base
vertical solid shaft pump motors. The motors
are stocked in totally enclosed fan cooled,
open drip proof, and many explosion proof
ratings. Applications for these run the gamut
from swimming pool pumps to medium and high
thrust in-line pumps used in water treatment
plants. Horse powers range in size from 1/3
through 75 HP. |
 |
|
Servo
Baldor's servo line includes both brushless
and brush type motors. Designs are available
having either ferrite or rare earth magnets.
Numerous ratings are stocked and are available
with Baldor controls for Matched Performance.
These motors are ideal for industrial
applications where high torque to inertia
ratio and repeatability are needed. These
applications include material handling, X-Y
positioning, machine tools, factory
automation, and packaging equipment.
|
 |
|
Two-Speed
Two Speed Motors are available in both totally
enclosed fan cooled and open drip proof
designs. Constant torque or variable torque
motors having one winding or two winding are
stocked in NEMA frames 56 through 284T.
Applications for these motors include fans,
blowers, pumps, machine tools, hoists and
conveyors. |
 |
|
Vector
Vector Drive Motors are stocked in either
totally enclosed blower cooled with an
attached constant velocity fan or totally
enclosed non-ventilated construction. All
motors are supplied with a 1024 line count
encoder. Horse powers are available from 1
through 500 HP in NEMA frame sizes from 56C
through 5009L. The motors are ideal in
industrial applications where full torque is
needed from base speed down to zero speed.
Applications include test stands, material
handling, packaging equipment, printing
presses, and others requiring exact speeds and
positioning. |
 |
|
Washdown
Baldor's Washdown Duty Motors are available
from stock in single and three phase AC and in
DC designs. Horsepowers range from 1/2 to 20.
Designs include motors having an
electostatically applied epoxy finish, paint
free with major components in 300 series
stainless steel, and all stainless steel.
Applications include food processing,
packaging, pharmaceuticals, or applications
where motors are regularly exposed to high
pressure wash down. |
|
|
|
|
|
