Home > Manufacturers > Baldor > Motors > AC Motors > Severe Duty Motors > IEEE 841, Three Phase, Totally Enclosed, 460 Volts > Foot Mounted > 150 to 250 HP (NEMA Frame 445TS - 449T) >

Baldor - ECP849156T-4 150HP, 1200RPM, 3PH, 447T, TEFC, Motor Super 'E'
Baldor - ECP849156T-4
This product is discontinued and no longer available. Call for replacement.
Please note that this product does NOT qualify for free shipping and may require truck freight

Applications: Petro-chemical, pulp and paper, cement, aggregate mining and other process industries requiring premium efficient motors designed, manufactured and tested to exceed IEEE 841-2009 TEFC motor standards for extreme severe duty service.

Features: Built 841XL design. Upgraded electrical and mechanical design with NEMA premium efficient winding.. Inpro/Seal VBX (thru 210 frame) and VBXX bearing isolators on fan and drive end shaft extensions and epoxy paint provides IP56 enclosure. Oversized bearings on both ends of motor with positive lubrication system. Stainless breather drains. Proprietary cast iron frames for reduced vibration and noise. Terminal lugs on motor leads. Final test and vibration results shipped with motor. Enhanced motor nameplate data.

Additional Product Information:
pdfDownload the ECP849156T-4 Data Sheet in *.pdf format

Documents & Downloads:

Manufacturer Warranty: 36 Months*

*Warranty is based on date of manufacture as indicated on the product nameplate. Baldor reserves the right to repair or replace any product that is deemed to be in warranty. All warranty claims are subject to verification by inspection at an authorized service center or the factory. Warranty covers material and workmanship only. Proof of purchase may be required. A 6-month shelf life from date of manufacture will be allowed on all Baldor-Reliance products. (18 month warranty + 6 month shelf life = 24 months from date of manufacture maximum.) Note: Certain high thrust pump or heavy belted motors may have normal bearing life that is less than motor warranty if built in an IEEE 841 configuration. Bearings are a maintenance item and are not subject to 60 month coverage.