Home > Manufacturers > Lenze AC Tech > Drives > MC Series Drives > MC3000 > NEMA 1 > 120-240 Volt 1 Phase Input >

M3103SB Lenze AC Tech MC3000 Series Drive: 0.25 HP (0.18 kW), 120-240V 1Ø input in NEMA 1encl.

M3103SB Lenze AC Tech MC3000 Series Drive
M3103SB
 
Manufacturer SKU: M3103SB


Availability: Usually Ships in 2 to 4 Weeks
Part Number: M3103SB
Call, Email, or Live Chat for Pricing or to Order

Description Technical Specs
 
M3103SB Lenze AC Tech MC3000 Series Drive: 0.25 HP (0.18 kW), 120-240V 1Ø input in NEMA 1encl.
M3103SB
Additional Product Information

The Lenze AC Tech MC3000 Series drives are built in rugged steel enclosures that hold up to daily life on the factory floor. The easy to read 16 character LCD display above the drive keypad allows for easy and intuitive set up as well as daily operation.

This constant horsepower drive can be set up for simple applications requiring ramped start, ramped stop and speed control to demanding applications that require PID set-point control and many other functions.  For non-reversing applications that require independent switching of start and stop from local to remote and speed control from auto to manual, the MC3000 series keypad replaces the forward/reverse button with Local/Remote.

The MC3000 industrial drives

The choice when your process control demands fast acceleration and response. Designed expressly for use where the motor control is an integral part of a process, the MC3000 is rated for constant torque applications but can easily be configured for variable torque applications. Most process control drives are designed for variable torque applications where the motor is driving a centrifugal fan or pump. As such, these drives are limited to 110% current for overload situations such as acceleration or responding to a feedback change.

The MC3000 is a true Constant Torque drive rated for 180% of rated current for 30 seconds and 150% for one minute; this allows faster response to system changes and the ability to apply the MC3000 to non-centrifugal applications such as compressors, conveyors and other "constant torque" loads.

MC3000 drive features

  • 3-Speed synchronized flying restarts
  • Loss of follower signal action: fault or go to preset speed
  • Control configuration: local, remote, serial communications, keypad, terminal strip, PID mode
  • Adjustable units display: PSI, CFM, GPM, FPM, IN, FT, Hz, RPM, %, /SEC, /MIN, /HR
  • Auxiliary outputs - two open collector outputs and a Form-C relay: Functions include Loss of Speed Reference Signal, Run, Fault, Inverse Fault, Fault Lockout, At Commanded Speed, Above a Preset Speed, Current Limit, Auto/ Manual Mode Indication, PID High/Low Alarms
  • Sleep mode with adjustable speed threshold and time
  • Modbus Serial Communication Protocol (standard)

Expand the capabilities of your MC drive with the following options:

All options can be factory installed or field installed.

  • Dynamic Braking: for faster stopping or deceleration
  • Additional Form-C relay
  • Remote Keypad
  • PID: direct or reverse acting with adjustable Proportional, Integral, and Derivative gains, signal calibration, high and low level alarms. programming.