Home > Manufacturers > Red Lion Controls > Process Control > PID Controllers > Panel Mounted Process Controllers > P16 >

P1620000 Red Lion Controls 1/16 Din Process Control Units - w/Solid State Output

P1620000 Red Lion Controls Temperature Controller 1/16 Din Process Control Units - w/Solid State Output
P1620000
 
This product is discontinued and no longer available. The suggested replacement is the -  PXU20020
P1620000 Red Lion Controls Temperature Controller 1/16 Din Process Control Units - w/Solid State Output
P1620000




Additional Product Information:

The Red Lion Model P16 Controller accepts either a 0 to 10 VDC or 0/4 to 20 mA DC input signal. The controller can provide an accurate output control signal (time proportional or DC Analog Output) to maintain a process at a setpoint value. Dual 4-digit displays allow viewing of the process/temperature and setpoint simultaneously. Front panel indicators inform the operator of the controller and output status. The comprehensive programming allows the controller to meet a wide variety of application requirements.

The controller operates in the PID Control Mode for both heating and cooling, With on-demand auto-tune, that establishes the tuning constants. The PID tuning constants may be fine-tuned through the front panel and then locked out from further modification. The controller employs a unique overshoot suppression feature, that allows the quickest response without excessive overshoot. Switching to Manual Mode provides the operator direct control of the output. The controller may also be programmed to operate in On/Off mode with adjustable hysteresis.