RS Series
The RS Series is a solid-state, encapsulated, recycling timer designed for tough industrial environments. It is used by many testing labs as a life cycle tester; by others as a cycle controller. The RS Series has separate DIP switch adjustments for the on delay and the off delay. These make accurate adjustment possible the first time, every time. Time delays of 0.1 seconds to 1023 hours are available in 4 ranges.
Operation (Recycling - ON Time First)
Upon application of input voltage, the output energizes and the T1 ON time begins. At the end of the ON time, the output de-energizes and the T2 OFF time begins. At the end of the OFF time, the output energizes and the cycle repeats as long as input voltage is applied.
Reset: Removing input voltage resets the output and time delays, and returns the sequence to the ON time.
Operation (Recycling - OFF Time First)
Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the output energizes and the T1 ON time begins. At the end of the ON time, the output de-energizes and the cycle repeats as long as input voltage is applied.
Reset: Removing input voltage resets the output and time delays, and returns the sequence to the OFF time.
Features:
- Accurate, reliable, recycling timer
- Switch settable time delays - both times
adjustable
- ±0.1% repeat accuracy
- ±2% setting accuracy
- 0.1s - 1023h in 4 ranges
- 12 to 230V in 5 options
- 1A, solid-state output
- Totally solid state and encapsulated
Auxiliary Products:
- Female quick connect:
P/N: P1015-64 (AWG 14/16)
- Quick connect to screw adaptor:
P/N: P1015-18
- Mounting bracket: P/N: P1023-6
- DIN rail: P/N: C103PM (Al)
- DIN rail adaptor: P/N: P1023-20
|
|
