• When insulated terminals are required, 1-1/4" diameter shrink wrap to be used
• No tension on line (rear) terminal allowed
• 90 clockwise rotation to lock fuse carrier in body

Maximum panel thickness, mounting flange in front of panel

Assumes Pollution Degree 3 per UL 840:

Conductive pollution, or dry, nonconductive pollution that becomes conductive due to condensation that is expected

Thicker panels may be used if fuse holder load terminal is fully insulated, using a UL recognized (VW-1) insulative heat-shrink tubing, or if anticipated environment is of Pollution Degree 1 or 2, or if panel is nonconductive. Pollution Degree 2- Normally, only nonconductive pollution. However, a temporary conductivity caused by condensation may be expected. Pollution Degree 1- No pollution or only dry, nonconductive pollution. The pollution has no influence

Maximum panel thickness, mounting flange behind the panel: 5.08mm/0.200 (flush to knob collar)

Download the HPS2 specification sheet in *.pdf format