EG1 Series Information
- Unique Low-Profile Design
- Attractive Appearance
- Ultra‑Slim ‑ Protrudes Less Than One Inch from Wall
- No Visible Mounting Screws
- Exclusive FullLight Strobe Technology
The
EG1 series of signals are the smallest, most compact audible and
visible emergency signaling devices in the world. About the size of a
deck of playing cards, these devices are designed to blend with any
building environment. Edwards Genesis horn/strobes do not require bulky
specular reflectors. Instead, an exclusive mask‑and‑cavity design,
channels and conditions light to produce a highly controllable
distribution pattern. Intensive development employing this new
technology have given rise to a new benchmark in strobe performance ‑
FullLight technology.
The EG1‑HDVM series horn/strobes
offer 15 to 110 candela output, which is selectable with a
conveniently‑located switch on the side of the device. The EG1‑HDVMH
series offers 95 to 177 candela output. The candela output setting
remains clearly visible even after final installation, yet it stays
locked in place to prevent unauthorized tampering. Its horn output
reaches as high as 99 dB and features a unique multiple frequency tone
that results in excellent wall penetration and an unmistakable warning
of danger. Horns may be configured for either coded or non‑coded signal
circuits. They can also be set for low dB output with a jumper cut that
reduces horn output by 5 dB.
When installed with the Cat. No.
EG1M Signal Master, strobe flashes from devices on the same circuit are
synchronized to within 10 milliseconds of each other indefinitely. The
Signal Master also permits independent horn control over a single pair
of wires. Only one Signal Master is required per circuit. No separate
backbox ‑ simply snap it onto the back of the first signal on the
circuit.
- Low Current Draw
- 15/30/75/110 and 95‑177 Candela Output Models
- High (Default) or Low DB Horn
- Temporal (Default) or Steady Horn
- Public Mode Flash Rate (Default) or Private Mode Temporal Flash