Home > Manufacturers > K - O > KB Electronics > DC Drives > Chassis IP-20 DC Drives > KBRG DC Motor Speed Controls >

KBRG-225D KB Electronics 115/230 VAC, thru 1.5/3.0 HP, 90/180 VDC ARM (8800)

KBRG-225D KB Electronics 115/230 VAC, thru 1.5/3.0 HP
KBRG-225D
 
Price: $375.34
Manufacturer SKU: KBRG-225D
Manufacturer ID: 8800


Availability: Normally Stocked
Part Number: KBRG-225D
Qty:

Description
 
KBRG-225D KB Electronics 115/230 VAC, thru 1.5/3.0 HP, 90/180 VDC ARM (8800)

Plug-in Horsepower Resistor Not Required The control uses a jumper for current selection
Plug-in Line Fuse Included Fuse is included with the control
Plug-in Armature Fuse Included Fuse is included with the control. Armature fuse may have to be changed if the control is to be used with a lower rated motor


pdf Consult the Plug-in Horsepower Resistor and Plug-in Fuse Selection Charts for proper sizing based on motor horsepower and amperage.
KBRG225D
Additional Product Information

The KBRG™ is a full-wave regenerative control, capable of operating a DC motor (Permanent Magnet or Shunt) in a bidirectional mode. It provides 4-quadrant operation which allows forward and reverse torque in both speed directions. The KBRG™ contains many standard features, such as: armature and tach feedback, built-in horsepower selection, trimpots for FWD CL, REV CL, IR COMP, RESP, MAX SPD, OFFSET, DEADBAND, FWD ACCEL, REV ACCEL and Timed Current Limit. LED indicators for: Power On, Current Limit, FWD Enable and REV Enable. A 5k ohm speed potentiometer is included.