AM2 Cabinets
The range of AM2 cabinets allows construction of electric switchboards for operation and control of technological plants, covering the middle market segment of automation switchboards in particular.
These monobloc enclosures are suitable for making floor-mounted electric switchboards, offering numerous customization possibilities based on individual needs and habits. The AM2 cabinets, within the range of ABB automation enclosures, take an intermediate position in terms of dimensions, functions and price, in between the SR2 enclosures and the IS2 cabinets, offering a unique ensemble of technical characteristics, along with simplicity of assembly.
Versions available
- Panel board with blind door (single for W ≤1000mm, double with overlapping closure for W≤800mm)
- Panel board with glazed door
- Panel board with 19” fixed rack frame
- Distribution cabinet with DIN rails and panels
The range of AM2 cabinets is available with 36 different dimensions:
- Height from 1000 to 2000mm
- Width from 600 to 1600mm (the cabinets with width ≥ 1200mm are only supply at the front with double door)
- Depth 300, 400 and 500mm
- Two different versions: with blind door and with glazed door
The AM2 cabinets can also be installed in environments with risk of explosion due to the presence of dust (ATEX), as foreseen under the European 94/9 CE directive and from the relative EN 50281-3 Standard.
The full compliance with the IEC 62208 Standards (Empty enclosures for low voltage switchgear and controlgear assemblies) and the relative technical characteristics, allow use of the AM2 cabinets in the most varied application contexts, as prescribed by the IEC 60204-1 Standard on electrical equipment, “Safety of electrical equipment of machines”, by the EN 60439-1 Standard and by the new EN 61439-1-2 Standard on “Low voltage switchgear and controlgear assemblies”.
The whole range of AM2 cabinets is characterised by its IP65 degree of protection, tested and verified according to the EN 60529 Standard. AM2 cabinets have also passed the checks required to obtain the TYPE 12 UL marks (Underwriters Laboratories).
Impact resistance is in conformity with the IEC 62262 Standard and is IK10 for the versions with blind doors and IK09 for those with glass doors. The standard colour is orange peel RAL 7035. On request, it is possible to order the AM2 cabinets in a wide range of RAL colours (see page 7/12) and to use the mounted accessories service.
The above-mentioned versatility features are such as to allow the use of AM2 cabinets as switchgear and controlgear of industrial processing machines and plants, air conditioning plants, up to application such as distribution switchboards for plants, buildings etc.
 Download the Enclosures for Automation brochure in *.pdf format
|
|
|
