|
For sales and support please call 800-558-1899
|
- Replaces Hollow Shaft Models Directly
- No Moving Wearing Parts
- Universal 5-24V Operation
- LED & Remote Alarm Diagnostics
- -40°C to +100°C Operation
- 2 Year No-Hassle Warranty
|
 Click to view the AV32 Series Datasheet in *.pdf format
Want a super-simple, ultra-reliable OEM encoder? Bullseye!
Avtron Bullseye32™ (AV32) encoders eliminate the top culprits that cause encoder failures: there are no bearings, no seals, no optics, no glass disks!
And they don't require expensive mounting flanges like other no-bearing encoders.
Bullseye32 self-centers without a pilot and mounts in seconds: Tighten the rotor clamp on the shaft, bolt the housing in place, and unlock the patented centering mechanism by removing the red end cap. Top it off with the shaft cap. It's so simple, we've created a visual instruction sheet (in our documents tab) for installation.
Bullseye32 is protected against dust, dirt and water. Why waste installation time protecting encoders with baskets? How about a Bullseye instead - it's tougher than most "protective baskets"! And Bullseye32 includes complete self-diagnostics, right down to the signal quality and wiring!
Bullseye32 is also electrically tough: in addition to a built-in voltage regulator, Bullseye32 is fully protected from reverse voltage wiring and shorting.
Output Format: A Quad B with marker (A,/A, B,/B, Z,/Z) available
Frequency Range: 0 to 125 KHz
PPR: 1 - 3600 Standard (for other PPR needs consult factory)
Speed: 6000 RPM Max., (for higher speeds, consult factory)
Axial Load: 100 lbs [45 kg] max.
Radial Load: 100 lbs [45 kg] max.
Temperature: -40° to 100°C
Environment: Nema 4/IP65 (when provided with shaft seals)
Vibration: 5-2000 Hz
Shock: 50G, 11mS duration
Weight: 0.575 lbs [260 g]
|
