Walker Industrial: Home > Manufacturers > A - D > Ametek Gemco > 9966 Motogard
9966 Motogard
Sort By:
1
Ametek Gemco 1151012 Ametek Gemco 9966 Motogard Temperature Protection System 115101-2

Ametek Gemco 9966 Motogard Temperature Protection System 115101-2

Usually Ships in 1 to 2 Weeks
Price: $626.00
Ametek Gemco 120101 Ametek Gemco 9966 Motogard Temperature Protection System 120101

Ametek Gemco 9966 Motogard Temperature Protection System 120101

Normally Stocked
Price: $401.00
Ametek Gemco 135101 Ametek Gemco 9966 Motogard Temperature Protection System 135101

Ametek Gemco 9966 Motogard Temperature Protection System 135101

Usually Ships in 1 to 2 Weeks
Price: $800.00
Ametek Gemco 150101 Ametek Gemco 9966 Motogard Temperature Protection System 150101

Ametek Gemco 9966 Motogard Temperature Protection System 150101

Usually Ships in 1 to 2 Weeks
Price: $318.00
   
 
1
* Series 115 Series 120 Series 135 Series 150
Model No. 115101-2 120101 135101 150101
Operating characteristics: 6 Inputs, 2 Triac Outputs, 1 - NO 1 NC 3 Inputs, Single Triac Output, N.C. 3 Inputs, Form C Relay Output 1 Input, Form C Relay Output
Input Rating: 120 VAC 10% Single Phase 50/60 hz 120 VAC 10% Single Phase 50/60 hz 120VAC 10% Single Phase 50/60 hz 120 VAC 10& Single Phase 50/60 hz
Output Rating: 120/240 Volts 5 amp continuous 120/240 3 amp continuous 120/240 Volts AC or 28 Volts DC 5 amp continuous 120 Volt AC for size 5 contactor coil
Input Resistance Control: Controller on with 500 ohms or less - off with appx. 1500 ohms or more Controller ON with 500 ohms or less - OFF with appx. 1500 ohms or more Controller ON with 100 to 500 ohms or less - OFF with appx. 1500 ohms or more Controller ON with 100 to 500 ohms or less - OFF with appx. 3500 ohms or more
Isolation: Controller output, excitation, and sensor input electrically isolated from each other Controller excitation only isolated from output and sensors Controller output, excitation, and sensor input electrically isolated from each other Controller output, excitation, and sensor input electrically isolated from each other
Dimensions: 5.50"W x 4.24"L x 3.12"H 3.24"W x 2.25"L x 2.50"H 5.75"W x 2.0"L x 5.68"H 3.25"W x 2.25"L x 2.50"H
Enclosure: Potted in NEMA 12 steel case Potted in polyester case Mounted in welded case Potted in polyester case


Motogard Over-Temperature Protection Systems provide immediate overheating protection for motors, equipment enclosures, semiconductor heatsinks, sleeve bearings and other related machinery. All Motogard Systems fully conform to the NEC requirements for integral motor thermal protection. Using Positive Temperature Coefficient (PTC) thermistors embedded in or in contact with the surface, the Motogard system is able to continually sense when the equipment exceeds the pre-selected temperature limits.

pdfDownload the 9966 Motogard data sheet in *.pdf format.