Walker Industrial: Home > Manufacturers > Baldor > Motors > AC Motors > Farm Duty Motors > Irrigation Tower Drive, Three Phase, TENV > No Endplate, Footless (1 HP)

Irrigation Tower Drive
3PH No Endplate Footless
TENV Farm Duty
Sort By:
1
Baldor - IM3540A-P IM3540A-P - Baldor 1HP, 1425/1725RPM, 3PH, 50/60HZ, 56YZ, 3524M, Motor Farm Duty

IM3540A-P - Baldor 1HP, 1425/1725RPM, 3PH, 50/60HZ, 56YZ, 3524M, Motor Farm Duty

Usually Ships within 24 hours
   
 
1

Baldor Irrigation Tower Drive Three Phase No Endplate Footless TENV Farm Duty Applications:

Used in irrigation tower drive motors.

These motors feature sealed fit at endplates, can shed water, a conduit box cast into front endplate, epoxy paint and high overload capabilities. The "P" indicates less pulley endplate for integral mounting; can be field modified for older designs with internal thru bolts. Operable at 50/60 Hz. 1.00 service factor. Baldor's farm duty motors are designed for many of the varied applications found on the farm. Designs include motors suitable for aeration fans, auger drives, grain stirring, metering pumps, instant reversing, irrigation tower drives, and crop driers. General purpose motors are also available in both single and three phase, TEFC and ODP construction. For those loads that are hard to start and require extra torque, Baldor is the only motor manufacturer that stocks Repulsion-Start Induction Run motors, in sizes from 2 HP to 10 HP. All Farm Duty Motors come with a 24 month warranty.

Baldor Irrigation Tower Drive, Three Phase, No Endplate, Footless, TENV, Farm Duty Catalog Pages in *.pdf format