Armed, Actuated, and Stop Status conveyed by highly visible illumination with simple installation.
Banner's round, 30 mm mount E-Stop buttons are ideal for many emergency stop safety
applications with bright, highly visible indication. The easy to install E-Stops are available with two-color yellow and red lighting, red lighting
only, or a non-illuminated black base. EZ-LIGHT logic provides an illuminated yellow base when the button is armed and the machine is enabled
to RUN or is running, and turns to a flashing red indication whenever the button is pushed. The base of an armed button can also turn to a steady red
indication (from yellow) when a STOP condition exists by applying an external signal.
installation and hookup with no assembly,individual wiring or
additional enclosure required
intensive labor costs with a fully enclosed E-Stop button ready
models with yellow and red (flash) indication of actuation (armed
or depressed/latched button) and machine status (solid red -
optional) allows for easy identification of an actuated
models with various contact configurations such as 2 NC, 1 NC/1
NO and 2 NC/2 NO; illuminated models with 2 NC and a PNP NO
design rated to IP65 with a 30 mm mounting base
Break Action ensures NC contacts will open if the contact block
is separated from the actuator
available to interface with Safety BUS nodes/gateways
buttons can be interfaced and series connected with CSS Series
twist-to-release or pull-to-release operation per
design complies with ISO 13850; direct (positive) opening
operation per IEC 60947-5-1
with ANSI B11.19, ANSI NFPA79, and IEC/EN 60204-1 Emergency Stop
more information or
to place an order, please
give us a call at
800-876-4444 or 203-426-7700.
To purchase online
please click here.
Online Ordering is Now Available For Many Banner
Click Here to Shop Now!