Home > Manufacturers > Banner Engineering > Machine Safety > Emergency Stop & Stop Control > 30 mm Mount Emergency Stop Buttons > SSA-EB Emergency Stop Push Buttons > Illuminated >

SSA-EB1PLXR-02ECQ5B - Banner Engineering SSA-EB1 30 mm Mount Emergency Stop Push Button:; Red-Flash illuminated base; 40 mm Actuator; IP65; Contacts: 2NC; M12 5-pin QD; Safety BUS node compatible CH1=pins1&4 CH2=pins2&5

SSA-EB1PLXR-02ECQ5B - Banner
Price: $180.00
Manufacturer SKU: SSA-EB1PLXR-02ECQ5B
Manufacturer ID: 26263

Availability: Usually Ships in 3 to 5 Business Days
Part Number: SSA-EB1PLXR-02ECQ5B

Banner Engineering SSA-EB Emergency Stop Push Button SSA-EB1PLXR-02ECQ5B


Models SSA-EB... series are "mushroom-style" electro-mechanical emergency stop push buttons. When the button is armed, the switch’s safety contacts (N.C.) are closed and its monitoring contacts (N.O.) if present, are open. When the button is pushed, the switch’s safety contacts open and the monitoring contacts close. The contacts remain in this condition until the push button is manually rearmed by pulling or twisting clockwise the red push button actuator.

The SSA-EB1p-ECQ series has a 30 mm mounting base similar to Banner's OTB, VTB, STB Optical Touch Buttons for ease of mounting without requiring an additional enclosure.


  • Rugged design; easy installation with no assembly or individual wiring required
  • Push-to-stop, twist-to-release, or pull-to-release operation per IEC60947-5-5
  • Latching design complies with ISO 13850; direct (positive) opening operation per IEC 60947-5-1
  • Compliant with ANSI B11.19, ANSI NFPA79, and IEC/EN 60204-1 Emergency Stop requirements
  • "Safe Break Action" ensures N.C. contacts will open if the contact block is separated from the actuator
  • 4-,5-, or 8-pin M12/Euro-style Quick Disconnect
  • Models Designed to interface with Safety BUS nodes/gateways
  • "Emergency Stop" legend included

    pdfDownload the SSA-EB1PLXR-02ECQ5B Data Sheet in *.pdf format.