|
|
FLEX LPI Current Loop Powered Indicators
|
|
|
|
The FLEX LPI
is ideal for calibrated current loop indication in new system designs
or in adding display to existing control loops. Its rugged die-cast
enclosure is NEMA-4/IP65 rated, allowing installation in demanding
industrial environments including wash-down applications.
-
Requires no power connections - operates from loop current
-
Large, high-contrast LCD with 3-1/2 active digits
-
Minus sign and overflow indicators
-
Selectable right-hand "Dummy Zero"
-
Programmable decimal point - tenths, hundredths, or thousandths
-
Operates in 4-20mA or 10-50mA current loops
-
Coarse and fine potentiometer adjustments for zero and span
-
Reading rate of 2.5 updates per second
-
Wide operating temperature range, -20 to +60C
-
Meets NEMA-4 requirements for water- and dust-tight seal
The FLEX LPI features coarse and fine adjustments for zero
(offset) and span, for quick and easy calibration. A quick-disconnect
plug-in connector and panel mounting hardware and gasket is provided.
|
|
|