Walker Industrial: Home > Manufacturers > Dodge > Bearings, Mounted > Take-Up Frames and Baseplates

Take-Up Frames and Baseplates
Baldor-Dodge Take Up Frames
Baldor-Dodge offers a wide variety of take up frames. The flexibility of Dodge's basic take-up frames allow for the mounting of Ball, Roller, and Sleeve Bearings to encompass the vast range of conveyor, belt, and chain take-up applications. They are made to provide/maintain tension and shaft centers on a variety of belt and chain-type conveyors and the frame capacity is pre-engineered to exceed bearing capacity.

Narrow Slot Take-Up Frame - NS

Five sizes of Narrow Slot Ball Bearing Take-Up Frames-Eleven (11) take-up frames with travels of 6 to 18 inches for:
  • GT & GTM Narrow Slot Take-Up Bearings from 3/4” through 2-7/16” shaft size and metric 20mm to 60mm.
  • SC, VSC & SCM Ball Bearing Take-Up Bearing from 1/2” through 2-7/16” shaft size, and metric 20 mm to 60 mm.
  • SXV and SXR Ball Bearing Take-Up Bearing from 3/4” through 2-7/16” shaft size.
  • DL Ball Bearing Take-Up Bearing from 3/4” through 1-7/16” shaft size.
  • LT700 and LT1000 SOLlDLUBE Take-Up Bearing from 3/4” through 2-1/2” shaft size.
Wide Slot Take-Up Frame - WS
Six sizes of Wide Slot Ball Bearing Take-Up Frames-Thirty (30) take-up frames with travels of 1-1/2 to 30 inches for:
  • GT & GTM Wide Slot Ball Bearings from 3/4” through 3” shaft size and metric 20mm to 75mm.
  • SC, VSC and SCM Wide Slot Take-Up Bearings from 1/ 2” through 3" shaft size, and metric 20 mm to 75 mm.
  • SXV and SXR Wide Slot Take-Up Bearings from 3/4” through 2-7/16” shaft size.
  • DL Ball Bearing Take-Up Bearing from 1-7/16” through 1-15/16” shaft size.
  • LT700 and LT1000 SOLlDLUBE Wide Slot Take-Up Bearing from 3/4” through 3" shaft size.
Telescoping Take-Up Frame - TS
Telescoping Take-Up Frames
  • Space saving telescoping take-up frame quickly mounts to the side of a conveyor
  • Use any standard ball or roller bearing 2-bolt pillow block
  • Factory lubricated adjustment screw
  • Internal take-up frame screw is protected from the surrounding environment
  • Bearing mounting plate is standard on all Dodge telescoping take-up frames.
Available Options
  • Four bolt mounting plate (4B)
  • Tapped base mounting plate (TB)
  • Weld-on frame (without mounting feet) (WF)
  • Stainless Steel (SS)
  • Grease Fitting (GF)
Top Angle Take-Up Frame - TP
Six sizes of Top Angle Take-Up Frames-Thirty-Six (36) Take-Up frames with travels of 12 to 48 inches for:
  • GLT-700 & GLT-1000 Series (SOLIDLUBE Sleeve) Take-Up bearings from 1-15/16” through 3" shaft size.
  • Type H (Babbitted Sleeve) Take-Up bearings from 1-15/16” through 3-15/16” shaft size.
  • Type G (SC Ball Bearing) Take-Up bearings from 1-15/16” through 2-15/16” shaft size.
  • Type GXR (SXR Ball Bearing) Take-Up bearings from 1-15/16” through 2-7/16” shaft size.
  • Type GM (SCM Ball Bearing) Take-Up bearings from 1-11/16” through 3-1/2” shaft size.
  • Type E (Tapered Roller) Take-Up bearings from 1-3/4” through 4" shaft size.
  • Type K (Tapered Roller) Take-Up bearings from 1-3/4” through 3-15/16” shaft size.
  • TP S2000 (Spherical Roller) Take-Up bearings from 1-7/8” through 4" shaft size.
TPHU Take-Up Frame
Six sizes of TPHU Take-Up Frames-Twenty-Four (24) Take-Up frames with travels of 12 to 36 inches for:
  • TPHU S-2000 (Spherical Roller) Take-Up Bearings from 1-7/8” through 5” shaft size.
Center Pull Take-Up Frame - CP
Nine sizes of Center Pull Wide Slot Take-Up Frames-Forty-five (45) take-up frames with travels of 12 to 36 inches for:
  • Type E tapered wide slot bearing from 1-3/8” to 3" bore size.
  • Type K tapered wide slot bearing from 1-3/8” to 3" bore size.
  • S-2000 spherical wide slot bearing from 1-1/8” to 5" bore size.
  • Imperial spherical wide slot bearing from 1-7/16” to 4” bore size.
  • U.S. Patent No. 4,676,670
BRONZOIL Take-Up Frame - BOTU
One size of BRONZOlL®) Sleeve Bearing Take-Up-The BRONZOIL Take-Up is recommended for light-to-medium loads and for use at moderate speeds; such as package conveyors, light material handling installations, or other similar applications.

There are 6 take-ups from 1/2” through 1” shaft size with 4 inch travel.

Light Duty Take-Up Frame - LD
Six sizes of LD Protected Screw Take-Up Frames - Forty-Five (45) take-up frames with 6 to 48 inch travel for:
  • SC/SCB (Ball Bearing) pillow blocks from 1/2” through 2-15/16” bore size.
  • SXR/SXRB & SXV/SXVB (Ball Bearing) pillow blocks from 1/2” through 2-7/16” bore size
  • DL/DLB (Ball Bearing) pillow blocks from 3/4” through 2-15/16” bore size.
  • SCM (Ball Bearing) pillow blocks from 1-7/16” through 3-1/2” bore size.
  • DLM (Ball Bearing) pillow blocks from 1” through 3-7/16” bore size
  • Babbitted (Sleeve) Solid Journal bearing from 1/2” through 2-15/16” bore size.
  • SOLIDLUBE (Sleeve) LT700 and LT1000 Series pillow blocks from 3/4” through 3” bore size.
  • SOLIDLUBE (Sleeve) LTB700 and LTB1000 Series pillow blocks from 3/4” through 2-1/2” bore size.
  • UNISPHERE (Spherical Roller) two (2) bolt base pillow block from 1-7/16” through 3-1/2” bore sizes.
  • Imperial (Spherical Roller) two (2) bolt base pillow block from 1-7/16” through 3-15/16” bore size.
  • SCH, SCH-E SXRH, SXRH-E, DLH, DLH-E SCMH SCMH-E, DLMH, DLMH-E.
  • GT/GTB (Ball Bearing) pillow blocks from 1/2” through 2-15/16” bore size
  • GTM (Ball Bearing) pillow blocks from 1” through 3-7/16” bore size
Heavy Duty Take-Up Frame - HD
Eight sizes of HD Protected Screw Take-Up Frames-Forty-One (41) take-up frames with travels from 12 to 60 inches for:
  • Angle Babbitted (Sleeve) pillow blocks from 1-15/16” through 5-15/16”, bore size.
  • Angle Bronze Bushed (Sleeve) pillow blocks from 1-15/16” through 5-15/16”, bore size.
  • Type E (Taper Roller) pillow blocks from 1-1/2” through 6" bore size.
  • Type K (Taper Roller) pillow blocks from 1-1/2” through 3-15/16” bore size.
  • K/DI (Taper Roller) pillow blocks from 1-1/2” through 5" bore size.
  • Type C (Taper Roller) pillow blocks from 1-11/16” through 5" bore size.
  • Special Duty (Taper Roller) pillow blocks from 2-11/16” through 6" bore size.
  • SOLIDLUBE (Sleeve) MM700 and MM1000 Series pillow blocks from 3-7/16” through 5" bore size.
  • SAF-XT, TAF, ISAF, etc. (Spherical and Tapered Roller) pillow blocks from 1-15/16” through 5-1/2” bore size and larger.
  • USAF, SAFS spherical pillow blocks, 2-bolt and 4-bolt from 2-7/16” through 5-1/2” bore size.
  • S2000 spherical pillow blocks, 2-bolt and 4-bolt from 1-7/8” through 5" bore size.
  • UNISPHERE (Spherical Roller) pillow block 2-bolt base from 1-15/16” through 4" bore sizes.
  • Imperial (Spherical roller) pillow block 2-bolt and 4-bolt from 1-15/16” through 4-15/16” bore size.
  • For larger bore bearings use HD600 or HD650, consult DODGE.