| Edwards Signaling 97 and 97DF Series Lights | |
|
|
The Edwards Signaling 97 Series AdaptaBeacon Heavy Duty strobes lights are
designed for use where more frequent and longer lasting signaling cycles may
be required. A series of complementing fresnels cause the dome to "fill"
with light each time the strobe flashes. Beam distance is also increased
with external fresnel lenses. These strobes are also available in "double
flash" versions that double the apparent strobe on-time (50 double flashes
per minute).
The 97 Series' trigger and timing circuits are included as integral parts of
the power supply. Replacement costs are reduced as it is necessary to
replace only the strobe tube.
Designed for indoor or outdoor installation. May be direct or 3/4" (19mm)
conduit mounted on any plane. However, vertical installation ensures maximum
beam width projection. For weatherproof installations units must be mounted
vertically with dome up.
The 97 Series is also ideally suited for installations where high ambient
light levels make traditional rotating or flashing lights difficult to
distinguish. The gasket weatherproof design assures installation
acceptability in most industrial and commercial locations. Often used on
forklifts, overhead cranes, and repair vehicles.
Edwards Signaling 97 and 97DF Series Strobe Lights features and benefits:
- Weatherproof
- Immune to shock and vibration
- Optically designed fresnel lens
- Cast base may be used as a junction box
 Download the
97 and 97DF Series Strobe Lights data
sheet in *.pdf format.
|
|
|
