|Edwards Signaling 93 and 93DF Series AdaptaBeacon Heavy Duty Strobe|| |
The Edwards Signaling 93 Series AdaptaBeacon Heavy Duty strobe lights are
for use where more frequent and longer lasting signaling cycles may be
required. They are designed with a series of complementing fresnels that
cause the dome to "fill" with light each time the strobe flashes. Beam
distance is increased with external fresnel lenses. These strobes are also
available in "double flash" versions that double the on-time (50 double
flashes per minute).
The 93 Series' trigger and timing circuits are included as integral parts of
the power supply. Replacement costs are reduced as it is necessary to
replace only the strobe tube.
Designed for indoor or outdoor installation. May be direct or 3/4" (19mm)
conduit mounted on any plane. However, vertical installation ensures maximum
beam width projection. For weatherproof installations, units must be mounted
vertically with dome up.
The 93 Series is ideally suited for installations where high ambient light
levels make traditional rotating or flashing lights difficult to
distinguish. The gasketed weatherproof design assures installation
acceptability in most industrial and commercial locations.
They are used to signal equipment malfunctions, security intrusions, or
pinpointing problem locations.
Edwards Signaling 93 and 93DF Series AdaptaBeacon Heavy Duty Strobes features and benefits:
- Single and double flash models
- Optically designed fresnel lens
- Cast base may be used as a junction box
- Immune to shock and vibration
93 and 93DF Series Heavy Duty Strobes Data sheet in *.pdf format.