|Edwards Signaling 96B and 98B Series AdaptaBeacon Light Duty Strobe|| |
The Edwards Signaling 96B Series AdaptaBeacon Light Duty strobe lights are
low profile units that are designed for light duty applications in
industrial, commercial, and institutional applications where short term
intermittent visual signaling is required. A series of complementing
fresnels cause the dome to "fill" with light each time the strobe flashes.
This design feature increases the AdaptaBeacon "on-time", thus improving
viewer perception. Beam distance is increased with external fresnel lenses.
The 96B Series' trigger and timing circuits are included as integral parts
of the power supply. Replacement costs are reduced as it is necessary to
replace only the strobe tube.
Designed for indoor or outdoor installation. May be direct or 1/2" (13mm)
conduit mounted on any plane. However, vertical installation ensures maximum
beam width projection. For weatherproof installations units must be mounted
vertically with dome up.
The 96B Series strobe is usually used where a smaller output is desired or
where multiple, smaller strobes are required. They are ideally suited for
installations where high ambient light levels make traditional rotating or
flashing lights difficult to distinguish or where ambient noise levels make
audible signals difficult to hear. The gasketed weatherproof design assures
installation acceptability in most industrial and commercial locations.
Edwards Signaling 96B and 98B Series Light Duty Strobes features and benefits:
- Snap-on high impact plastic base
- Optically designed fresnel lens
- Immune to shock and vibration
Download the 96 & 98 Series
Flashing Xenon Strobe Beacons
datasheet in *.pdf format