Home > Manufacturers > P - S > SSAC > Timers & Flashers > Liquid Level Controls & Alternating Relays > LLC6 Series >

LLC6410F10M - SSAC Liquid Level Cutoff 120VAC 10s FXD 10K 11-PIN
LLC6410F10M - SSAC
LLC6410F10M
This is a family photo and may not be an accurate representation of the product.
 
Price: $80.58
Returnable: NOT RETURNABLE
Manufacturer SKU: LLC6410F10M



Availability: Usually Ships in 3 to 5 Days
Part Number: LLC6410F10M
Qty:

Description
 
LLC6410F10M - SSAC Liquid Level Cutoff 120VAC 10s FXD 10K 11-PIN

The LLC6 Series Family

The LLC6 Series is a plug-in, single-probe conductive liquid level control designed for low liquid level cutoff protection. It offers a factory fixed time delay of 1 - 60s and is available in input voltages of 24, 120, or 230VAC. LED indicator illuminates whenever the LLC6's 10A, SPDT output relay is energized. Available with automatic/manual reset or a special manual reset with power outage feature, which auto resets the unit when power is restored and the water level is acceptable. 24VAC and 120VAC units are recognized as limit switches under UL353 (230VAC units are UL508) and CSA certified under Standard 14.

Operation
Automatic Reset (Reset terminals not connected): When liquid rises to the low level cutoff probe, the output relay and the LED indicator energize. When the liquid falls below low level cutoff probe, the output relay and the LED indicator de-energize after a fixed time delay.

Manual Reset (Reset switch connected): When the liquid level falls below the low level probe, the output relay and LED de-energize after a fixed time delay. When the liquid level rises to the low level probe, the output relay and LED indicator remain de-energized until the manual reset switch is opened; then they energize immediately. Power Outage

Manual Reset (Reset switch connected): A power outage causes the output relay and LED indicator to de-energize. Upon restoration of power, if the liquid level is above the low level probe, the output relay and LED indicator will re-energize. If the liquid level is below the low level probe, the output relay and LED indicator remain de-energized until the Normally Closed (NC) reset switch is opened.

Features:

  • Designed for low level cutoff protection
  • Energized on wet probe
  • Fixed time delay of 1 - 60s
  • Fixed sense resistance of 5K - 250K?
  • 24, 120, or 230VAC input voltage available
  • Non-isolated, 10A, SPDT output contacts

Auxiliary Products:

  • Electrode: P/N: PHST-38QTN
  • Threaded probe (24"): P/N: LLP-24
  • Panel mount kit: P/N: BZ1
  • 11-pin socket: P/N: NDS-11
  • Hold-down clips (sold in pairs): P/N: PSC11 (NDS-11)
pdfDownload the The SSAC Product Line catalog in *.pdf format
pdfDownload the The LLC6 Series Datasheet datasheet in *.pdf format

Product Accessories
PSC11 - SSAC Two Hold Down Clips for NDS 11 Base
Price: $13.48

Add
PSC11 - SSAC
PHST-38QTN - SSAC Electrode for Liquid Level Control
Price: $43.65

Add
PHST-38QTN - SSAC
NDS-11 - SSAC 11-PIN Socket 300VAC Surface or DIN
Price: $10.85

Add
NDS-11 - SSAC
BZ1 - SSAC Panel Mount Kit for Plug In Products
Price: $29.71

Add
BZ1 - SSAC
LLP-24 - SSAC Threaded Probe 24 inches for PHST Electrode
Price: $35.70

Add
LLP-24 - SSAC