Walker Industrial: Home > Manufacturers > P - S > SSAC > Timers & Flashers > Liquid Level Controls & Alternating Relays > LLC6 Series

LLC6 Series
Sort By:
1
LLC6210F10M - SSAC LLC6210F10M - SSAC Liquid Level Cutoff 24VAC 10s FXD 10K 11-PIN

Liquid Level Cutoff 24VAC 10s FXD 10K 11-PIN (SSAC LLC6210F10M)

Usually Ships in 3 to 5 Days
Price: $80.58
LLC6410F10M - SSAC LLC6410F10M - SSAC Liquid Level Cutoff 120VAC 10s FXD 10K 11-PIN

Liquid Level Cutoff 120VAC 10s FXD 10K 11-PIN (SSAC LLC6410F10M)

Usually Ships in 3 to 5 Days
Price: $80.58
   
 
1
LLC6 Series

The LLC6 Series is a plug-in, single-probe conductive liquid level control designed for low liquid level cutoff protection. It offers a factory fixed time delay of 1 - 60s and is available in input voltages of 24, 120, or 230VAC. LED indicator illuminates whenever the LLC6's 10A, SPDT output relay is energized. Available with automatic/manual reset or a special manual reset with power outage feature, which auto resets the unit when power is restored and the water level is acceptable. 24VAC and 120VAC units are recognized as limit switches under UL353 (230VAC units are UL508) and CSA certified under Standard 14.

Operation
Automatic Reset (Reset terminals not connected): When liquid rises to the low level cutoff probe, the output relay and the LED indicator energize. When the liquid falls below low level cutoff probe, the output relay and the LED indicator de-energize after a fixed time delay.

Manual Reset (Reset switch connected): When the liquid level falls below the low level probe, the output relay and LED de-energize after a fixed time delay. When the liquid level rises to the low level probe, the output relay and LED indicator remain de-energized until the manual reset switch is opened; then they energize immediately. Power Outage

Manual Reset (Reset switch connected): A power outage causes the output relay and LED indicator to de-energize. Upon restoration of power, if the liquid level is above the low level probe, the output relay and LED indicator will re-energize. If the liquid level is below the low level probe, the output relay and LED indicator remain de-energized until the Normally Closed (NC) reset switch is opened.

Features:

  • Designed for low level cutoff protection
  • Energized on wet probe
  • Fixed time delay of 1 - 60s
  • Fixed sense resistance of 5K - 250K?
  • 24, 120, or 230VAC input voltage available
  • Non-isolated, 10A, SPDT output contacts

Auxiliary Products:

  • Electrode: P/N: PHST-38QTN
  • Threaded probe (24"): P/N: LLP-24
  • Panel mount kit: P/N: BZ1
  • 11-pin socket: P/N: NDS-11
  • Hold-down clips (sold in pairs): P/N: PSC11 (NDS-11)