Categories
Walker Industrial: Home > Manufacturers > K - O > Migatron > Ultrasonic Sensors > Controllers with Remote Sensing Heads > RPS-2300 & RPS-2325
Migatron RPS-2300, RPS-2325 Sensors
Sort By:
1
RPS-2300-14 - Migatron RPS-2300-14 - Migatron RPS-2300 Controller with Remote Sensing Head, 4"-14" range, (2) Isolated Form C Relay Outputs

RPS-2300-14 - Migatron RPS-2300 Controller with Remote Sensing Head, 4"-14" range, (2) Isolated Form C Relay Outputs

Usually Ships in 3 to 5 Days
Price: $1,075.00
RPS-2300-36 - Migatron RPS-2300-36 - Migatron RPS-2300 Controller with Remote Sensing Head, 5"-36" range, (2) Isolated Form C Relay Outputs

RPS-2300-36 - Migatron RPS-2300 Controller with Remote Sensing Head, 5"-36" range, (2) Isolated Form C Relay Outputs

Usually Ships in 3 to 5 Days
Price: $1,075.00
RPS-2300-72 - Migatron RPS-2300-72 - Migatron RPS-2300 Controller with Remote Sensing Head, 8"-72" range, (2) Isolated Form C Relay Outputs

RPS-2300-72 - Migatron RPS-2300 Controller with Remote Sensing Head, 8"-72" range, (2) Isolated Form C Relay Outputs

Usually Ships in 3 to 5 Days
Price: $1,075.00
   
 
1

The RPS-2300 is a single transducer device with 2 independant range control adjustments, LED indicators, and form C relay outputs. These make the sensor well suited for high and low level control, or other applications where two set points are needed. The transducer heads are made of Delrin with epoxy face for the 14" and 36" sensors and Valox with a silicon face for the 72". A sealed silicon rubber sensing face is used making this sensor best suited for environments where dirt is a problem. This sensor also has a unique master and slave feature which enables many of the same units to be used within close proximity of one another without cross-talk interference. For example, if three sensors are needed in a close area, one sensor would be left as a master and the other two would be slaves. This is done by means of the X IN, X OUT, and GND connection on the board. One sensor (master) would send a signal by means of the X OUT and GND terminals. These would be connected to the X IN and GND terminals of the other two sensors (slaves).

The RPS-2325 is a single transducer device with 2 independent range control adjustments, LED indicators, and form C relay outputs. These make the sensor well suited for high and low level control, or other applications where two set points are needed. The transducer head is constructed of 303 stainless steel with a 302 stainless steel sensing face making this unit best suited for environments where dirt is a problem, as well as some chemical environments. This sensor also has a unique master and slave feature which enables many of the same units to be used within close proximity of one another without cross-talk interference. For example, if three sensors are needed in a close area, one sensor would be left as a master and the other two would be slaves. This is done by means of the X IN, X OUT, and GND connection on the board. One sensor (master) would send a signal by means of the X OUT and GND terminals. These would be connected to the X IN and GND terminals of the other two sensors (slaves). With the sensors connected in this way, all units would be transmitting and receiving at the same time.