Walker Industrial: Home > Manufacturers > K - O > NK Technologies > DC Current Switches

DC Current Switches
Sort By:
1
DS1-NODC-FF - NK Technologies DS1-NODC-FF - NK Technologies - Fixed 0.75 Amp Maximum Setpoint, Top Terminals 10-28 VDC Powered N.O., 1 A @ 28 VDC

DS1-NODC-FF - NK Technologies - Fixed 0.75 Amp Maximum Setpoint, Top Terminals 10-28 VDC Powered  N.O., 1 A @ 28 VDC

Price: $110.00
DS3-NOU-12U - NK Technologies DS3-NOU-12U - NK Technologies - Adjustable Setpoint, 2-20, 10-50 & 20-100 Amp Ranges, Side Terminals, SmartLED, 12 VAC/VDC Powered N.O. 0.15 A @ 240 VAC/VDC

DS3-NOU-12U - NK Technologies -  Adjustable Setpoint, 2-20, 10-50 & 20-100 Amp Ranges, Side Terminals, SmartLED, 12 VAC/VDC Powered  N.O. 0.15 A @ 240 VAC/VDC

Price: $165.00
DS3-NOU-24U - NK Technologies DS3-NOU-24U - NK Technologies - Adjustable Setpoint, 2-20, 10-50 & 20-100 Amp Ranges, Side Terminals, SmartLED, 24 VAC/VDC Powered N.O. 0.15 A @ 240 VAC/VDC

DS3-NOU-24U - NK Technologies -  Adjustable Setpoint, 2-20, 10-50 & 20-100 Amp Ranges, Side Terminals, SmartLED, 24 VAC/VDC Powered  N.O. 0.15 A @ 240 VAC/VDC

Price: $165.00
DS3-SDT-12U - NK Technologies DS3-SDT-12U - NK Technologies - Adjustable Setpoint, 2-20, 10-50 & 20-100 Amp Ranges, Side Terminals, SmartLED, 12 VAC/VDC Powered SPDT Relay 5 A @ 240 VAC or 30 VDC

DS3-SDT-12U - NK Technologies -  Adjustable Setpoint, 2-20, 10-50 & 20-100 Amp Ranges, Side Terminals, SmartLED, 12 VAC/VDC Powered  SPDT Relay 5 A @ 240 VAC or 30 VDC

Price: $172.00
DS3-SDT-24U - NK Technologies DS3-SDT-24U - NK Technologies - Adjustable Setpoint, 2-20, 10-50 & 20-100 Amp Ranges, Side Terminals, SmartLED, 24 VAC/VDC Powered SPDT Relay 5 A @ 240 VAC or 30 VDC

DS3-SDT-24U - NK Technologies -  Adjustable Setpoint, 2-20, 10-50 & 20-100 Amp Ranges, Side Terminals, SmartLED, 24 VAC/VDC Powered  SPDT Relay 5 A @ 240 VAC or 30 VDC

Price: $172.00
   
 
1
DC Current Transducers
Current Sensing Switches are designed to trip a solid-state contact when there is DC current through the sensor window. The sensor can be used to interlock two operations for safety. When one load is energized, the contact will keep another from also energizing. The power supply voltage and the controlled circuit voltage can be derived from a single source or separate sources. The monitored circuit can be any DC voltage and any amount of current as long as the conductor will pass through the window. The monitored circuit is completely isolated from the control circuit. If there is 3/4 of one amp through the aperture, the output will change state.