TSD9 Series
The TSD9 Series retriggerable single shot timer is designed for a variety of applications. Its digital circuit provides long or short delays with accuracy and stability over a wide voltage and temperature range. It is the ideal timer for pulse train monitoring of programmable controllers, or any system requiring motion detection.
Specifications:
- Time Delay
- Type: Digital integrated circuitry
- Range: 0.1 second to over 16 hours available
in six ranges, adjustable or factory fixed
(See Ordering Information)
- Repeat Accuracy: ±0.5%
- Tolerance (Factory Calibration): ±1 %
- Recycle Time: 300 milliseconds maximum
- Time Delay vs. Temperature & Voltage: ±2%
- Initiate Time: 16 milliseconds maximum AC
1 milliseconds maximum DC
- Input
- Operating Voltage: 12 and 24 volts DC, 24, 120
and 230 volts AC
- Tolerance: ±15%
- DC Ripple: 10% of nominal
- Output
- Type: Solid State
- Form: Normally open
- 1 ampere steady state, 10 amperes inrush at 55°C
- Voltage Drop: DC 1 volt typical at 1 ampere
AC 2.5 volts typical at 1 ampere
- DC Operation: Positive switching mode
- Protection
- Transient: Protected
- Dielectric: 1500 volts RMS
- Insulation Resistance: 100 megohms minimum
- Reverse Polarity Protected (DC Units)
- Mechanical
- Mounting: Surface mount with one #8 or #1 O
screw
- Package: Molded housing with encapsulated
circuitry
- Termination: 1 /4 inch male quick connect
- Environmental
- Operating Temperature: -40° C to +60°C
- Storage Temperature: -40°C to + 85°C
- Humidity: 95% relative
Features:
- Excellent pulse train monitor
- Totally solid state and encapsulated
- Digital C/MOS circuitry
- Fast reset to zero during timing
- Excellent accuracy and reliability
- Polarity protected
|
|