|
Model Number
|
Description
|
|
BWA-RIBBON-001
|
Ribbon Cable, 20-pin DBL socket
|
|
CSB-M1240M1241
|
Splitter cable, 4-pin Euro-style QD, No trunk male,
two 0.3m female branches, yellow. Use to connect the Data Radio to the
10-30V dc DX80 Gateway.
When using 10 to 30V dc to power both the data radio and the Gateway, use this 4-pin Euro-style splitter cable.
|
|
CSRB-M1250M125.47M125.73
|
Splitter cable, 5-pin Euro-style QD, No trunk male,
two female branches (0.43 ft and 0.73 ft long), black. Most commonly
used with solar and other FlexPower devices.
When using the FlexPower Solar Supply or other FlexPower supply to
power both the data radio and the FlexPower Gateway, use this 5-pin
Euro-style splitter cable.
|
|
CSRB-M1253.28M1253.28M1253.28
|
Splitter cable for dual power sources, 5-pin
Euro-style female trunk to two 5-pin Euro-style male branches. The trunk
and each branch are 1 meter long.
Typically used to connect the SureCross Solar Supply and a DX81P6 Battery pack to a single SureCross FlexPower radio.
|
|
BWA-DRSPLITTER
|
Splitter Cable with a 4-pin Euro-style male trunk, one
DB9 (serial) female branch, and one 5-pin Euro-style female branch. The
trunk and each branch is 0.3 meters long.
Use this cable to connect a SureCross device to power and to a 9-pin serial port on a computer or other industrial device.
|
|
BWA-HW-026
|
Splitter Cable with a wall plug to supply external
power to a MultiHop Radio operating at 1 Watt while it is connected to a
computer. The wall plug splits to 5-pin Euro-style male and 5-pin
Euro-style female ends. The male end plugs into the USB to RS-485
adapter cable (model number BWA-HW-006) and the female end plugs into
the MultiHop radio.
|
|
BWA-HW-010
|
Cable, FlexPower Current Monitoring
|
|
BWA-HW-006
|
Cable, Adapter, RS-485 to USB
Used to connect a Gateway to a computer to use the User
Configuration Tool software. To be used with the DX80...C models, these
adapter cables requires cable model MQDMC-401.
|
|
BWA-UCT-900
|
Cable, Adapter, RS-485 to USB, with wall plug to power
1 Watt radios during configuration
Used to connect a 1 Watt Gateway to a computer to use the User
Configuration Tool software. To be used with the DX80...C models, these
adapter cables requires cable model MQDMC-401.
|