Walker Industrial: Home > Manufacturers > Banner Engineering > Machine Safety > Safety Controllers and Modules > Universal Input Safety Modules

Banner Engineering Universal Input Safety Modules

UM-FA-11A - Banner UM-FA-11A - Banner Engineering UM-FA-11A 22.5mm UNVRSL MODULE CNTCT/SLD ST IN 2NO & 1NC OU

UM-FA-11A - Banner Engineering UM-FA-11A 22.5mm UNVRSL MODULE CNTCT/SLD ST IN 2NO & 1NC OU

Stock
Price: $203.00
UM-FA-9A - Banner UM-FA-9A - Banner Engineering UM-FA-9A 22.5mm UNIVRSL MODULE CNTCT/SLD ST IN 3NO OUT

UM-FA-9A - Banner Engineering UM-FA-9A 22.5mm UNIVRSL MODULE CNTCT/SLD ST IN 3NO OUT

Stock
Price: $203.00
  • Monitors a wide variety of safety and non-safety input devices:
    • Optical-based safeguarding devices, such as Safety Laser Scanners
    • Positive-opening safety switches used for guard interlocking
    • Emergency-stop devices, such as palm buttons and rope/cable pulls
    • Standard sensors for non-safety applications, such as photoelectric monitoring position or end-of-travel
  • The safety inputs can monitor:
    • +24V dc solid-state (PNP) outputs in single-channel or dual-channel hookup
    • +24V dc source that is switched by hard/relay contacts in single-channel or dual-channel hookup
    • Hard/relay contacts in a dual-channel hookup using terminals S11-S12 and S21-S22
  • UM-FA-9A: Three normally open (N.O.) output switching channels for connection to control-reliable power interrupt circuits
  • UM-FA-11A: Two normally open (N.O.) and one normally closed
    (N.C.) output switching channels for connection to control-reliable
    power interrupt circuits
  • Automatic reset or monitored manual reset, depending on hookup
  • Design complies with Category 4 PLe (ISO 13849-1), SIL 3 (IEC 61508/IEC 62061), and Control Reliable (ANSI B11.19)
  • Safety Integrity Level (SIL) 3 (IEC 61508/62061)
  • Performance level (PL) e (ISO 13849-1)
  • For use in functional stop category 0 applications per ANSI NFPA 79 and IEC/EN 60204-1