Banner Engineering Safety Controllers and Modules

Categories

Walker Industrial: Home > Manufacturers > Banner Engineering > Machine Safety > Safety Controllers and Modules

SC22-3 Controller

Totally configurable safety controller monitors numerous safety devices such as E-stop buttons, interlocking switches, safety light screens, two-hand controls and rope pull switches.

More Info ›
SC22-3E Controller

Non-safety monitoring of the Safety Controller I/O via Ethernet network communications, including Modbus/TCP, Ethernet I/P and PCCC. 32 configurable virtual status outputs with "Auto Configuration" option

More Info ›
SC26 Series Safety Controller

With the option to add up to eight I/O expansion modules, the XS26-2 expandable safety controller has the capacity to adapt to a variety of machines, including large scale machines with multiple processes.

More Info ›
XS26-2 Series Expandable Safety Controller

With the option to add up to eight I/O expansion modules, the XS26-2 expandable safety controller has the capacity to adapt to a variety of machines, including large scale machines with multiple processes.

More Info ›
Universal Input Safety Modules

For 24V ac/dc operation, solid-state or relay inputs; Monitors a wide variety of safety and non-safety input devices; Automatic reset or monitored manual reset, depending on hookup

More Info ›
E-Stop & Guard Monitoring Modules

Modules monitor up to 10 external devices for contact failure or wiring faults; Module goes into lockout mode if it detects a fault; Available voltages include 24V dc; 24V ac/dc; 115V ac or 12 to 24V dc; or 230V ac or 12 to 24V ac/dc.

More Info ›
Extension Modules

Provides additional safety outputs for a primary safety device; Offers four normally open (NO) safety outputs; Provides delayed or immediate outputs, depending on model; Offers choice of 24V dc or 24V ac/dc supply voltage, depending on model

More Info ›
Safe Speed Monitoring Modules

Module connects to two sensors with PNP outputs, monitoring rotation (rpm) or linear movement. Provides over-speed, under-speed and zero-speed detection.

More Info ›
Muting Modules

Suspends safeguarding during hazard-free times in the machine�s cycle; Allows material to move into or from the process, without tripping the primary safeguard; Available in models for Type 2 and Type 4 applications

More Info ›
Safety Mat Monitoring Modules

Safety Mat Monitor Modules SM-GA-5A and SM-HA-5A (the "Safety Module") are used to verify the proper operation of 4-wire presence-sensing switching mats (sensors).

More Info ›

Banner Engineering Safety Controllers and Modules

Industrial safety controllers and modules provide an interface between safety devices and the machines and processes those devices monitor.

SC22-3 Controller

SC22-3E Controller

SC26 Series Safety Controller

XS26-2 Series Expandable Safety Controller

Universal Input Safety Modules

E-Stop & Guard Monitoring Modules

Extension Modules

Safe Speed Monitoring Modules

Muting Modules

Safety Mat Monitoring Modules

Quick Links

About Us

Contact Us