SSAC Flashers

Walker Industrial: Home > Manufacturers > P - S > SSAC > Timers & Flashers > Flashers

Flashers

FS100 / FS200 Series

The FS100 Series (medium amp) may be used to control inductive, incandescent, or resistive loads. Input voltages of 24, 120, or 230VAC are available.

More Info ›
FS300 / FS400 Series

The FS300 Series of solid-state flashers were specifically designed to operate lamp loads. The FS400 Series is a low leakage AC flasher designed to control LED, or resistive loads.

More Info ›
FS500 Series

The FS500 Series flash rate is adjustable from 10 to 100 FPM. A locknut is provided to hold selected flash rate. The long-life electronic circuit combined with a quality electromechanical relay provides flexibility and reliability in most applications.

More Info ›
FSU1000 / FS100 Series

The FSU1000 incorporates an onboard adjustable flash rate of 10 to 100 FPM and a universal input voltage in one device. Its circuitry is encapsulated and is capable of controlling loads of up to 20A.

More Info ›
SC3 / SC4 Series

The SC3/SC4 Series are solid-state 3 or 4 channel, chasers designed for sequential three or four circuit flashing of incandescent lamp loads. Unlike electromechanical chasers, there are no contacts to arc, wear, and eventually fail.

More Info ›
SCR Series

The SCR series is a universal lamp alarm relay designed to sense the failure of flashing or steady incandescent beacon lamps or steady side lights.

More Info ›

SSAC Flashers