SC3 / SC4 Series
The SC3/SC4 Series are solid-state 3 or 4 channel, chasers designed for sequential three or four circuit flashing of incandescent lamp loads. Unlike electromechanical chasers, there are no contacts to arc, wear, and eventually fail. Fixed or adjustable rates of 30 to 300 operations per minute.
Operation
Sequential 3 or 4 circuit flashing of incandescent loads with equal time delays for each load. Upon application of input voltage, Load 1 is energized. At the end of the time delay, Load 1 de-energizes and Load 2 energizes. At the end of the time delay, Load 2 de-energizes and Load 3 energizes. This cycle continues until input voltage is removed.
Reset: Removing input voltage resets the unit and cycle.
Features:
- Sequential 3 or 4 circuit flashing of
incandescent loads
- Fixed or adjustable at 30 - 300FPM
- 1A steady state output
- 24, 120, or 230VAC input voltage
- Totally solid state - encapsulated
Auxiliary Products:
- Quick connect to screw adaptor: P/N: P1015-18
- Female quick connect:
- P/N: P1015-13 (AWG 10/12)
- P/N: P1015-64 (AWG 14/16)
- P/N: P1015-14 (AWG 18/22)
|
|
