THD1 Series
The THD1 Series combines accurate timing circuitry with high power solid-state switching. It can switch motors, lamps, and heaters directly without a contactor. You can reduce labor, component cost, and increase reliability with these small, easy-to-use, Digi-Power timers.
Operation (Delay-on-Make):
Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.
Features:
- High load currents up to 20A,
200A inrush
- Fixed or adjustable delays from
0.1s - 1000m
- ±0.5% repeat accuracy
- ±1% factory calibration
- 24, 120, or 230VAC
- Metallized mounting surface for
heat transfer
- Totally solid state & encapsulated
Auxiliary Products:
- External adjust potentiometer:
- P/N: P1004-95
- P/N: P1004-95-X
- Female quick connect:
- P/N: P1015-13 (AWG 10/12)
- P/N: P1015-64 (AWG 14/16)
- Quick connect to screw adaptor:
P/N: P1015-18
- Versa-knob: P/N: P0700-7
|
|
