Schmersal Pulse-Echo Non-Contact Sensors

Walker Industrial: Home > Manufacturers > P - S > Schmersal > Pulse-Echo Non-Contact Sensors

Schmersal Pulse-Echo Non-Contact Sensors

AZ200 Pulse-Echo Non-Contact Sensors

The AZ200 pulse-echo based non-contact safety interlock is designed for use with movable machine guards/access gates which must be closed for operator safety. The AZ 200 consists of an interlock switch and actuator unit with door handle and optional emergency exit handle. The actuator is always inserted into its housing, protecting the actuator and the operator against damage and injury.

More Info ›
AZM200 Pulse-Echo Non-Contact Sensors

The AZM200 Series is designed for machine/work cells where access to a hazardous work area must be controlled until safe conditions exist. Their solenoid-latching feature permits locking a machine guard until dangerous conditions, which may exist immediately after removal of power, have abated.

More Info ›
CSS 180 Pulse-Echo Non-Contact Sensors

The CSS 180 non-contact, electronic safety sensor is designed for application in safety circuits and is used for monitoring the position of movable safety guards. The CSS 180 Safety Sensor fulfills the requirements for proximity devices with defined behavior under fault conditions according to EN 60947-5-3 with the classification PDF-M (self-monitoring).

More Info ›
CSS 34 Pulse-Echo Non-Contact Sensors

The CSS 34 non-contact, electronic safety sensor is designed for application in safety circuits. In this application the safety sensor monitors the closed position of hinged, sliding or removable guards with the aid of a coded actuator. The CSS 34 Safety Sensor fulfills the requirements for proximity devices with defined behavior under fault conditions according to EN 60947-5-3.

More Info ›
MZM100 Pulse-Echo Non-Contact Sensors

The MZM 100 Series is designed for machine/work cells where access to a hazardous work area must be controlled until safe conditions exist. Their magnetic-latching feature permits locking a machine guard until dangerous conditions, which may exist immediately after removal of power, have abated.

More Info ›
MZM120 IP69K Pulse-Echo Non-Contact Sensors

The MZM120 is designed for application in safety circuits and is used for monitoring the position of movable separating safety guards. A door detection sensor monitors the closed condition of the safety guard. The latching force is activated by the detection of the actuator when the safety guard is closed.

More Info ›
CSS16

Schmersal CSS16 Pulse-Echo Non-Contact Sensors come in a thermoplastic enclosure with a high repeat accuracy of the switching points. There is early warning when operating near the limit of the sensor's hysteris range and feature self-monitoring series-wiring of 16 sensors.

More Info ›
CSS30S

Schmersal CSS30S Non-Contact Safety Sensors come in a stainless steel enclosure with an M12 8-pole connector, high repeat accuracy of the switching points, and integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet.

More Info ›
Door-handle Actuators

Schmersal Door-handle Actuators can save mounting and installation effort while also optimiziing the ergonomy. This is because the operator has got everything on one handle. Even the Emergency Stop button can optionally be integrated in the safety door handle.

More Info ›